This is a set of 12 German WWII pebble finish tunic buttons in the luftwaffe blue color with a maker on the back. The 12 buttons is what you will need to complete a tunic (5 to 6 on the front 4 for the pockets and 2 for the shoulder boards). Only officers had the smaller button on the shoulder boards. The diameter is 2 CM (apx. 3/4"). They are very well made and you will be sure to like them. It is only $2.00 to ship these buttons anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within Europe is $1.00. 

This is a set of 12 German WWII pebble finish tunic buttons in the fieldgrey color with a maker on the back. The 12 buttons is what you will need to complete a tunic (5 to 6 on the front 4 for the pockets and 2 for the shoulder boards). Only officers had the smaller button on the shoulder boards. The diameter is 2 CM (apx. 3/4"). They are very well made and you will be sure to like them. It is only $2.00 to ship these buttons anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within Europe is $1.00. 

This is a set of 12 German WWII pebble finish tunic buttons in the the Afrikakorps tan color with a maker on the back. The 12 buttons is what you will need to complete a tunic (5 to 6 on the front 4 for the pockets and 2 for the shoulder boards). Only officers had the smaller button on the shoulder boards. The diameter is 2 CM (apx. 3/4"). They are very well made and you will be sure to like them. It is only $2.00 to ship these buttons anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within Europe is $1.00.

This is a set of 12 German WWII pebble finish tunic buttons in the winter white with a maker on the back. These buttons were used primarily on the white side of the winter jacket. The diameter is 2 CM (apx. 3/4"). They are very well made and you will be sure to like them. It is only $2.00 to ship these buttons anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within Europe is $1.00.  If you have any question feel free to ask.

This is a set of 12 German WWII pebble finish tunic buttons in silver with a maker on the back. The 12 buttons is what you will need to complete a tunic (5 to 6 on the front 4 for the pockets and 2 for the shoulder boards). Only officers had the smaller button on the shoulder boards. The diameter is 2 CM (apx. 3/4"). They are very well made and you will be sure to like them. It is only $2.00 to ship these buttons anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within Europe is $1.00.

This is a set of 12 German WWII repro button S-rings that are used so that the buttons do not need to be sewn in the tunic. With 12 rings you will have enough to cover the entire tunic including the shoulder boards. These are the closest to the original tunic S-rings you will find. I have had them made exclusively for me with an agreement that I will have exclusivity to sell them. Much expense and time was spent to have them done to high standards. The ends of the metal filament are cut and then ground so that no burs will cut or grab on to the garment fabric. As well they were NICKLE PLATED and not chromed. The reason for the Nickle plating is that it is superior to chrome plating and the premium originals were also nickle plated. Nickle plating is a good bit more expensive than chrome but also hold better and does not flake like chrome and will not leave rust stains or chrome flakes on your tunic. It is $1.00 to send this item anywhere within Europe and $2 to send to the US, Canada, Australia, NZ and most places in Asia.

These items were worn under the service tunic color to make the tunic more comfortable and protect the tunic color from dirt a sweat. It is held on by the buttons that are located on the inside of the tunic color. Now you know what those buttons are for. Do note that you may have to alter one or more button on the tunic to make it fit since not all tunics are made the same way. The exact same was true for the original tunics. The size correspond to the tunic size 56 hence up to a 18" (46 cm) neck circumference. It is only $3.00 to ship this item anywhere in the US, Canada, Aus. NZ. and most of Asia and $2.00 within the EU.

This is a pair of Czech army suspenders from the communist era that are very similar to the German WW2 pants suspenders. You can either get them marked with an RB number or with the maker mark you see on the picture. If you do not specify a stamping you will get the RB stamp. In case you need them unmarked that can be done as well. It is only $3.50 to ship this item anywhere in the US, Canada, Australia, NZ and most of Asia. Postage within the EU is $2.50.

This is a set of 4 reproduction tunic belt hooks designed to help hold the equipment belt up at a proper level on a tunic. It was first used with the internal suspenders and later still continued when the external Y-straps were introduced. They are made to be as close as possible to the originals. The construction is of aluminum and has a coating of fieldgrey on them like many earlier originals did, later they were just plain aluminum. These as well have the proper profile to them unlike the cheap repros. The last two pictures show how the hooks go on the inner suspenders and inner tabs on the tunic. Postage within Europe is $1.50 and postage to the US, Canada, Australia and most other areas outside Europe is $2.00

This is a Czech made reproduction set of German WWII winter ear warmers. It was made according to an original item so it is authentic looking. It is only $5.00 to ship this item anywhere in the US and most places outside Europe and only $4.00 to ship within the EU. I accept paypal, other payment methods are possible too, just write to make an arrangement. DO SEE MY OTHER AUCTIONS AND EBAY STORE FOR MORE MILITARY ITEMS.